Solar Chimney
See also:
A solar chimney — often referred to as a thermal chimney — is a way of improving the natural ventilation of buildings by using convection of air heated by passive solar energy. A simple description of a solar chimney is that of a vertical shaft utilizing solar energy to enhance the natural stack ventilation through a building.
The solar chimney has been in use for centuries, particularly in the Middle east, as well as by the Romans.
Description
In its simplest form, the solar chimney consists of a black-painted chimney. During the day solar energy heats the chimney and the air within it, creating an updraft of air in the chimney. The suction created at the chimney's base can be used to ventilate and cool the building below.[1] In most parts of the world it is easier to harness wind power for such ventilation as is done with a Badgir (بادگیر), but on hot windless days a Solar chimney can provide ventilation where otherwise there would be none.
There are however a number of solar chimney variations. The basic design elements of a solar chimney are:
- The solar collector area: This can be located in the top part of
the chimney or can include the entire shaft. The orientation, type of
glazing, insulation and thermal properties of this element are crucial
for harnessing, retaining and utilizing solar gains
- The main ventilation shaft: The location, height, cross section and
the thermal properties of this structure are also very important.
- The inlet and outlet air apertures: The sizes, location as well as aerodynamic aspects of these elements are also significant.
A principle has been proposed for solar power generation, using a large greenhouse at the base rather than relying solely on heating the chimney itself. (For further information on this issue, see Solar updraft tower.)
Solar chimney and sustainable architecture
This solar chimney draws air through a geothermal heat exchange to provide passive home cooling. [2]
Air conditioning and mechanical ventilation have been for decades
the standard method of environmental control in many building types
especially offices. Global warming, pollution and dwindling energy
supplies have led to a new environmental approach in building design.
Innovative technologies along with bioclimatic principles and
traditional design strategies are often combined to create new and
potentially successful design solutions. The solar chimney is one of
these concepts currently explored by scientists as well as designers,
mostly through research and experimentation.
A Solar chimney can serve many purposes. Direct gain warms air
inside the chimney causing it to rise out the top and drawing air in
from the bottom. This drawing of air can be used to ventilate a home or
office, to draw air through a geothermal heat exchange, or to ventilate
only a specific area such as a composting toilet.
Natural ventilation can be created by providing vents in the upper level of a building to allow warm air to rise by convection
and escape to the outside. At the same time cooler air can be drawn in
through vents at the lower level. Trees may be planted on that side of
the building to provide shade for cooler outside air.
This natural ventilation process can be augmented by a solar
chimney. The chimney has to be higher than the roof level, and has to
be constructed on the wall facing the direction of the sun. Absorption
of heat from the sun can be increased by using a glazed
surface on the side facing the sun. Heat absorbing material can be used
on the opposing side. The size of the heat-absorbing surface is more
important than the diameter of the chimney. A large surface area allows
for more effective heat exchange with the air necessary for heating by
solar radiation. Heating of the air within the chimney will enhance
convection, and hence airflow through the chimney. Openings of the
vents in the chimney should face away from the direction of the prevailing wind.
To further maximize the cooling effect, the incoming air may be led through underground ducts before it is allowed to enter the building. The solar chimney can be improved by integrating it with a trombe wall. The added advantage of this design is that the system may be reversed during the cold season, providing solar heating instead.
A variation of the solar chimney concept is the solar attic.
In a hot sunny climate the attic space is often blazingly hot in the
summer. In a conventional building this presents a problem as it leads
to the need for increased air conditioning.
By integrating the attic space with a solar chimney, the hot air in the
attic can be put to work. It can help the convection in the chimney,
improving ventilation.[3]
The use of a solar chimney may benefit natural ventilation and
passive cooling strategies of buildings thus help reduce energy use, CO2 emissions and pollution in general. Potential benefits regarding natural ventilation and use of solar chimneys are:
CAD(TAS) Solar Chimney model
- Improved ventilation rates on still, hot days
- Reduced reliance on wind and wind driven ventilation
- Improved control of air flow though a building
- Greater choice of air intake (i.e. leeward side of building)
- Improved air quality and reduced noise levels in urban areas
- Increased night time ventilation rates
- Allow ventilation of narrow, small spaces with minimal exposure to external elements
Potential benefits regarding passive cooling may include:
- Improved passive cooling during warm season (mostly on still, hot days)
- Improved night cooling rates
- Enhanced performance of thermal mass (cooling, cool storage)
- Improved thermal comfort (improved air flow control, reduced draughts)
Precedent Study: The Environmental Building
The British Research Establishment (BRE) office building in Garston,
incorporates solar assisted passive ventilation stacks as part of its
ventilation strategy.
Designed by architects Feilden Clegg Bradley, the BRE offices aim to reduce energy consumption and CO2
emissions by 30% from current best practice guidelines and sustain
comfortable environmental conditions without the use of air
conditioning. The passive ventilation stacks, solar shading, and hollow
concrete slabs with embedded under floor cooling are key features of
this building. Ventilation and heating systems are controlled by the
building management system (BMS) while a degree of user override is
provided to adjust conditions to occupants' needs.
The building utilizes five vertical shafts as an integral part of
the ventilation and cooling strategy. The main components of theses
stacks are a south facing glass-block wall, thermal mass walls and
stainless steel round exhausts rising a few meters above roof level.
The chimneys are connected to the curved hollow concrete floor slabs
which are cooled via night ventilation. Pipes embedded in the floor can
provide additional cooling utilizing groundwater.
On warm windy days air is drawn in through passages in the curved
hollow concrete floor slabs. Stack ventilation naturally rising out
through the stainless steel chimneys enhances the air flow through the
building. The movement of air across the chimney tops enhances the
stack effect. During warm, still days, the building relies mostly on
the stack effect while air is taken from the shady north side of the
building. Low-energy fans in the tops of the stacks can also be used to
improve airflow.
Overnight, control systems enable ventilation paths through the
hollow concrete slab removing the heat stored during the day and
storing ‘coolth’ for the following day. The exposed curved ceiling
gives more surface area than a flat ceiling would, acting as a cool
‘radiator’, again providing summer cooling. Research based on actual
performance measurements of the passive stacks found that they enhanced
the cooling ventilation of the space during warm and still days and may
also have the potential to assist night-time cooling due to their
thermally massive structure.[4]
Passive down-draft cooltower
Cool tower at Zion National Park's Visitor Center provides cool air.
A technology closely related to the solar chimney is the evaporative
down-draft cooltower. In areas with a hot, arid climate this approach
may contribute to a sustainable way to provide air conditioning for buildings.
Evaporation of moisture from the pads on top of the Toguna buildings
built by the Dogon people of Mali, Africa contribute to the coolness
felt by the men who rest underneath. The women's buildings on the
outskirts of town are functional as more conventional solar chimneys.
The principle is to allow water to evaporate at the top of a tower,
either by using evaporative cooling pads or by spraying water. Evaporation cools the incoming air, causing a downdraft of cool air that will bring down the temperature inside the building.[5]
Airflow can be increased by using a solar chimney on the opposite side
of the building to help in venting hot air to the outside.[6] This concept has been used for the Visitor Center of Zion National Park. The Visitor Center was designed by the High Performance Buildings Research of the National Renewable Energy Laboratory (NREL).
The principle of the downdraft cooltower has been proposed for solar power generation as well. (See Energy tower for more information.)
See also
Notes
- ^ Solar powered Air Conditioning. Retrieved on 2007-03-10.
- ^ "A Theory of Power" ISBN 0595330304 Vail, Jeff (2005-06-28). Passive Solar & Independence. Retrieved on 2007-03-10.
- ^ Murti Nugroho, Agung; Mohd Hamdan bin Ahmad, Makmal Sain Bangunan. Possibility to Use Solar Induced Ventilation Strategies in Tropical Conditions by Computational Fluid Dynamic Simulation (PDF). Retrieved on 2007-03-10.
- ^ Ní
Riain, C.; M. Kolokotroni, M. Davies, J. Fisher, M. White, J. Littler
(1999). "Cooling Effectiveness of South Façade Passive Stacks in a
Naturally Ventilated Office Building - Case Study". Indoor and Built Environment 8 (5): 309–321. doi:10.1159/000024659.
- ^ Torcellini, Paul A.; Ron Judkoff, and Sheila J. Hayter (2002-08-23). Zion National Park Visitor Center: Significant Energy SavingsAchieved through A Whole-Building Design Process (PDF). Office of Scientific and Technical Information. Retrieved on 2007-03-10.
- ^ Elliot, Tom. Passive Air Conditioning. Institute for Appropriate Technology. Retrieved on 2007-03-10.
References
- Bansal, N. K.; Rajesh Mathur & M. S. Bhandari (July 1993). "Solar chimney for enhanced stack ventilation". Building and Environment 28 (3): 373–377. Elsevier Science Ltd.. doi:10.1016/0360-1323(93)90042-2.
- Afonso, Clito; Oliveira, Armando (June 2000). "Solar chimneys: Simulation and experiment". Energy and Buildings 32 (1): 71–79. IOP Publishing Limited. doi:10.1016/S0378-7788(99)00038-9. ISSN 0378-7788.
- Trombe, A. & Serres, L. (1994), “Air-earth exchanger study in real site experimentation and simulation”, Energy and Buildings 21 (2): 155–162, DOI 10.1016/0378-7788(94)90008-6
- Szikra, Csaba (April 2004). Hybrid ventilation systems (PDF). Retrieved on 2007-03-10.
- Pearlmutter, D.; E. Erell, Y. Etzion, I. A. Meir, H. Di (March 1996). "Refining the use of evaporation in an experimental down-draft cool tower". Energy and Buildings 23 (3): 191–197. Elsevier. doi:10.1016/0378-7788(95)00944-2.
- Dai, Y. J.; K. Sumathy, R. Z.
Wang, and Y. G. Li (January 2003). "Enhancement of natural ventilation
in a solar house with a solar chimney and a solid adsorption cooling
cavity". Solar Energy 74 (1): 65–75. Elsevier Science B.V.. doi:10.1016/S0038-092X(03)00106-3.
External links
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia Encyclopedia article "Solar Chimney"
|